Schluter Certified Shower Installer in Saint Paul, MN

The waterproofing system that does not leak. On every shower we build.

Schluter-Kerdi tile shower installation for Saint Paul bathrooms. Every shower waterproofed to the highest residential standard available. Saint Paul's historic neighborhoods — especially Summit Hill, Crocus Hill, and Mac-Groveland — often fall under preservation district guidelines. We have experience navigating Heritage Preservation Commission (HPC) reviews for exterior visible work.

We are a Schluter-trained shower installer serving the Twin Cities. Every tile shower we build uses a Schluter-Kerdi sheet membrane system over foam or cement board, with bonded Kerdi-Drain assemblies. No exceptions, no shortcuts, no green-board-and-mortar.

What's Included in a Saint Paul Schluter Showers

  • Schluter-Kerdi sheet membrane waterproofing on every wall
  • Kerdi-Drain bonded drain assembly
  • Kerdi-Board foam panels or Hardi cement board substrate
  • Custom tile shower walls and floor
  • Recessed niches with Kerdi-Board pre-fab niches
  • Benches, curbs, and curbless thresholds
  • Frameless glass or fixed-panel enclosures
  • Heated tile floor option
  • Lifetime workmanship warranty on waterproofing

Saint Paul Schluter Showers Cost Ranges (2026)

Real pricing tiers based on actual Saint Paul-area projects. Saint Paul's median home value of $295,000 supports the mid-range tier most commonly.

Basic Schluter shower
$6,000-$12,000
Subway tile or basic porcelain, standard 3x5 footprint, no niche.
Mid-range custom tile
$12,000-$25,000
Larger format tile, niche, bench, curbless conversion.
High-end custom
$25,000-$50,000+
Designer tile, fully tiled wet-room, frameless glass, heated floor, multiple niches.

Our Process

  1. 1
    Consultation + tile selection
    We measure the shower, walk through tile and glass options, and finalize layout.
  2. 2
    Demo + substrate
    Remove existing shower down to studs. Install Kerdi-Board or cement board with all seams and corners detailed.
  3. 3
    Waterproofing
    Apply Kerdi membrane to every wall and the floor, lap into the Kerdi-Drain assembly. Test pan with a 24-hour flood test before tile.
  4. 4
    Tile + grout
    Set tile, grout, seal natural stone if applicable. Install glass and trim.
  5. 5
    Final walk-through
    Care instructions, warranty paperwork, and final inspection.

About Remodeling in Saint Paul

Neighborhoods we serve in Saint Paul

Highland Park, Summit Hill, Mac-Groveland, Crocus Hill, Cathedral Hill, Como Park, Lowertown, St. Anthony Park, West 7th — covering ZIP codes 55101, 55102, 55103, 55104, 55105, 55106, 55107, 55108.

Typical Saint Paul homes

historic Victorians, 1920s Tudors, Cape Cods, Summit Avenue mansions, Highland Park ramblers.

Saint Paul permit notes

Saint Paul Department of Safety and Inspections (DSI) issues remodeling permits. Work in heritage preservation districts may require additional HPC review. Saint Paul permit office →

Saint Paul Schluter Showers FAQs

What is Schluter and why does it matter?+

Schluter Systems makes a sheet-membrane waterproofing system (Kerdi) that is bonded directly behind tile. It is the gold-standard residential shower waterproofing method in 2026. Done correctly, a Schluter shower is essentially waterproof for the life of the tile. Most Saint Paul shower leaks we tear out were built with the old mortar-bed-and-pan method, which fails after 10-20 years.

How is Schluter different from RedGard?+

RedGard is a paint-on liquid waterproofing membrane. It works when applied correctly, but installer technique matters: too thin and it fails. Schluter-Kerdi is a sheet membrane glued to the substrate. It is harder to install wrong because thickness is uniform. Both are accepted by the Tile Council of North America. We prefer Kerdi for consistency.

Can you do curbless showers with Schluter?+

Yes. Schluter makes pre-pitched curbless shower trays (Kerdi-Shower-LT) and linear drain assemblies (Kerdi-Line) specifically for curbless construction. Every curbless shower we install in the Saint Paul uses this system.

How much does a Schluter shower cost compared to a regular tile shower?+

The waterproofing system itself adds $800-$2,500 to a tile shower install compared to standard cement-board-and-liquid. The labor difference is minimal. The total cost is dominated by tile choice and shower size, not the waterproofing system.

Ready to start your Saint Paul schluter showers?

Free in-home consultation and quote. Most Saint Paul quotes delivered within 48 hours.

Get a Free Quote