Schluter Certified Shower Installer in Burnsville, MN
The waterproofing system that does not leak. On every shower we build.
Schluter-Kerdi tile shower installation for Burnsville bathrooms. Every shower waterproofed to the highest residential standard available. Burnsville has a strong mix of 1970s–80s split-level homes. Opening up the wall between the kitchen and dining area on these split-levels is one of our most common Burnsville remodel scopes.
We are a Schluter-trained shower installer serving the Twin Cities. Every tile shower we build uses a Schluter-Kerdi sheet membrane system over foam or cement board, with bonded Kerdi-Drain assemblies. No exceptions, no shortcuts, no green-board-and-mortar.
What's Included in a Burnsville Schluter Showers
- ✓Schluter-Kerdi sheet membrane waterproofing on every wall
- ✓Kerdi-Drain bonded drain assembly
- ✓Kerdi-Board foam panels or Hardi cement board substrate
- ✓Custom tile shower walls and floor
- ✓Recessed niches with Kerdi-Board pre-fab niches
- ✓Benches, curbs, and curbless thresholds
- ✓Frameless glass or fixed-panel enclosures
- ✓Heated tile floor option
- ✓Lifetime workmanship warranty on waterproofing
Burnsville Schluter Showers Cost Ranges (2026)
Real pricing tiers based on actual Burnsville-area projects. Burnsville's median home value of $320,000 supports the mid-range tier most commonly.
Our Process
- 1Consultation + tile selectionWe measure the shower, walk through tile and glass options, and finalize layout.
- 2Demo + substrateRemove existing shower down to studs. Install Kerdi-Board or cement board with all seams and corners detailed.
- 3WaterproofingApply Kerdi membrane to every wall and the floor, lap into the Kerdi-Drain assembly. Test pan with a 24-hour flood test before tile.
- 4Tile + groutSet tile, grout, seal natural stone if applicable. Install glass and trim.
- 5Final walk-throughCare instructions, warranty paperwork, and final inspection.
About Remodeling in Burnsville
Neighborhoods we serve in Burnsville
Burnsville Center, Sunset Pond, Crystal Lake, River Hills — covering ZIP codes 55306, 55337.
Typical Burnsville homes
1970s–80s ramblers, split-levels, newer two-stories, townhomes.
Burnsville permit notes
Burnsville building permits are managed by the city's Building & Inspections department. Burnsville permit office →
Burnsville Schluter Showers FAQs
What is Schluter and why does it matter?+
Schluter Systems makes a sheet-membrane waterproofing system (Kerdi) that is bonded directly behind tile. It is the gold-standard residential shower waterproofing method in 2026. Done correctly, a Schluter shower is essentially waterproof for the life of the tile. Most Burnsville shower leaks we tear out were built with the old mortar-bed-and-pan method, which fails after 10-20 years.
How is Schluter different from RedGard?+
RedGard is a paint-on liquid waterproofing membrane. It works when applied correctly, but installer technique matters: too thin and it fails. Schluter-Kerdi is a sheet membrane glued to the substrate. It is harder to install wrong because thickness is uniform. Both are accepted by the Tile Council of North America. We prefer Kerdi for consistency.
Can you do curbless showers with Schluter?+
Yes. Schluter makes pre-pitched curbless shower trays (Kerdi-Shower-LT) and linear drain assemblies (Kerdi-Line) specifically for curbless construction. Every curbless shower we install in the Burnsville uses this system.
How much does a Schluter shower cost compared to a regular tile shower?+
The waterproofing system itself adds $800-$2,500 to a tile shower install compared to standard cement-board-and-liquid. The labor difference is minimal. The total cost is dominated by tile choice and shower size, not the waterproofing system.
Ready to start your Burnsville schluter showers?
Free in-home consultation and quote. Most Burnsville quotes delivered within 48 hours.
Get a Free Quote